The Black Plate Door Pull

What it is and what it is made of

The Black Plate Door Pull is a flat bar pull with a rectangular mounting plate. The body is aluminum alloy, finished in black. It has a clean, straight profile that suits interior doors, cabinet fronts and sliding doors. The plate sits flush against the surface, and the pull stands out just enough to give your fingers a firm grip.

This is a simple, sturdy piece of hardware. It does not try to be fancy. It does its job: you pull, the door opens.

Sizes

Two sizes are available. Both come in the same black finish and the same pack quantity.

Measure your door or drawer front before you choose. The small size suits lighter doors and cabinet panels. The large size gives more surface area for a full-hand pull on heavier doors.

Color

Black is the only color offered for this pull. It is a solid, matte-leaning black that reads as black in most light. It pairs well with black hinges, black latches and dark wood tones. If you are matching existing hardware, this is a straightforward black that will not fight with other finishes.

How to fit it

Each pull fixes with two screws through the plate. You drill two holes in the door or panel, line up the plate, and drive the screws from the front. The screws go through the plate and into the door. No back plate or hidden bracket is needed.

A few notes for a clean install:

• Mark your hole centers with a pencil before you drill.
• Use a drill bit sized to your screws so the plate sits tight.
• Check that the pull is level before you tighten the second screw.
• For sliding doors, leave enough clearance between the pull and the frame.

The pack of 2 gives you a matching pair for a double door, or a spare for a future project.

Where it works

This pull suits interior doors, front doors, cabinet doors and sliding doors. It also works on wardrobe panels, storage crates and shop fixtures. Because it is aluminum alloy, it is light in the hand but strong enough for daily pulling. The flat plate spreads the load, so it does not rock or twist when you use it.

If you are replacing an old handle, check the distance between your existing screw holes. If the spacing does not match, you will need to drill new holes. That is normal for a plate-style pull.

Care

Wipe with a dry cloth. That is all it needs. Avoid abrasive pads and harsh cleaners, which can dull the black finish. A quick wipe now and then keeps the pull looking even and dark.

What you get

• 2 door pulls
• Black aluminum alloy body with mounting plate
• Two screws per pull, driven through the plate
• Sizes: 5.83 x 1.42 in (148 x 36 mm) or 5.04 x 0.98 in (128 x 25 mm)

This is a practical pull for anyone who wants a black, plate-mounted handle without a lot of fuss. It installs from the front, it comes in a pair, and it wipes clean with a dry cloth.