Curve / Brass Cup Pull

$36.95

A solid brass cup pull with a smooth, rounded face that rests comfortably in the hand on drawers and cabinet doors. Rear-mounted with included M4 screws so no hardware shows on the front.

Expected delivery Fri, Nov 6 to Sat, Nov 14

Free shipping over $49
30-day returns

Shipping and returns

Free shipping over $49. Arrives in 8-16 days. Shipping times and costs per country

Not what you were looking for? Return it within 30 days of delivery. How returns work

Specifications

Material: Solid brass
Fixing: Two M4 screws from the back
Screws: M4 x 20 mm self-tapping screws included
Care: Wipe with a dry cloth
Size: 5.9 x 0.94 in (150 x 24 mm)
Weight: 4.69 oz (133 g)
Colors: Antique brass, brushed brass, black, white
Sizes: 2.36 in (60 mm), 4.61 in (117 mm), 5.9 in (150 mm), 11.8 in (300 mm)

What it is

The Curve / Brass Cup Pull is a solid brass handle shaped like a shallow cup. The face is smooth and rounded, so your fingers rest along the curve instead of catching on a hard edge. It suits drawers, cabinet doors and built-in cupboards, and the brass gives it a little weight in the hand, 4.69 oz (133 g).

Because it mounts from the back, no screw heads show on the front. That keeps the face clean and lets the curve do the work.

Sizes

Four center-to-center sizes are available. Pick the length that matches the scale of your drawer or door.

Size	Best for
2.36 in (60 mm)	Small drawers, jewelry and bedside units
4.61 in (117 mm)	Kitchen drawers, bathroom vanities
5.9 in (150 mm)	Wide drawers, cabinet doors
11.8 in (300 mm)	Appliance panels, large built-ins

Each pull measures 5.9 x 0.94 in (150 x 24 mm) at the 5.9 in size, with the same 0.94 in (24 mm) depth across the range.

Colors

Choose from antique brass, brushed brass, black or white.

Antique brass has an aged, warm tone that suits traditional kitchens and older furniture. Brushed brass is brighter and more even, and it works well in modern rooms. Black is quiet and graphic, good for painted cabinets and workbenches. White blends into light doors and keeps the hardware understated.

You can mix finishes across a room, or keep one finish throughout for a calmer look.

Fitting

The pull fixes with two M4 screws from the back. M4 x 20 mm self-tapping screws are included, so you can mount it straight into wood drawers and doors.

Mark the two hole positions on the back of the drawer face, drill pilot holes to suit the screws, then drive them through the back of the panel into the pull. Check that the pull sits level before you tighten the last turns. If you are replacing old hardware, measure the distance between the existing holes and match it to one of the four sizes above.

A screwdriver is all you need. No special tools.

Care

Wipe the brass with a dry cloth. That is enough to keep dust and fingerprints off the surface. Avoid wet cloths and harsh cleaners, which can dull the finish over time.

Where it works

Cup pulls are a natural fit for kitchen drawers, bathroom vanities and dressers, but they also work on cabinet doors, laundry cupboards and workshop storage. The curve gives you a firm grip even when your hands are full or slightly damp, which is why they show up so often in busy kitchens and bathrooms.