Brushed brass, six sizes

Brass bar pull with ball feet

$32.95

Smooth brushed brass bar resting on two small ball feet, a heavy, understated pull that suits Shaker doors, flat slab fronts and old dressers alike.

Expected delivery Sat, Nov 7 to Sat, Nov 14

Free shipping over $49
30-day returns

Shipping and returns

Free shipping over $49. Arrives in 9-16 days. Shipping times and costs per country

Not what you were looking for? Return it within 30 days of delivery. How returns work

Specifications

Material: Brass
Finish: Brushed brass
Bar: Round, just under 1/2 in (12 mm) thick
Feet: Ball feet
Hole centers: 2-1/2 to 8-13/16 in (64 to 224 mm), six sizes
Sold: Each

A simple shape in heavy brass

The bar is just under 1/2 in (12 mm) thick and smooth all the way along, with a ball at each post instead of a straight leg. It is a pull that disappears into a room until you reach for it, and then feels heavier than you expect.

Sizes, lengths and weights

2-1/2 in (64 mm) centers: 4-1/2 in (115 mm) long, 4.6 oz (130 g)
3-3/4 in (96 mm) centers: 6-1/8 in (156 mm) long, 6.3 oz (178 g)
5-1/16 in (128 mm) centers: 7-3/8 in (188 mm) long, 7.4 oz (210 g)
6-5/16 in (160 mm) centers: 8-11/16 in (220 mm) long, 8.5 oz (242 g)
7-9/16 in (192 mm) centers: 10-1/4 in (260 mm) long, 10.2 oz (290 g)
8-13/16 in (224 mm) centers: 11-3/16 in (284 mm) long, 11.0 oz (313 g)

The 2-1/2 in (64 mm) size is the one for small drawers, bathroom vanities and furniture, where most modern pulls are too long. The 3-3/4 in (96 mm) size replaces the most common American drawer pull without new holes.

Finish and care

The brushed finish has a fine straight grain and a soft gold color. Wipe it with a damp cloth and dry it; avoid scouring pads, bleach and ammonia cleaners, which dull the grain.

Placement

On drawers, center the pull side to side and either center it top to bottom or set it in the top third on deep drawers. On doors, mount it vertically near the opening edge: near the bottom on wall cabinets and near the top on base cabinets. Keep the same height on every door in a run so the line reads straight across the kitchen.

Questions

Will this fit the holes from my old 3-3/4 in pulls?

Yes, if your old pulls have 3-3/4 in (96 mm) hole centers, the matching size here drops straight into the existing holes. Measure between the middles of the two holes to be sure; some older pulls are 3 in (76 mm), which this pull doesn't come in.

Does it come in other finishes?

This pull comes in brushed brass only. Our other pulls come in brushed nickel, antique brass, coffee bronze and matte black if you want a darker or cooler tone.

Is it brass all the way through?

The bar and ball feet are brass. Weight is the quick tell: the 5-1/16 in (128 mm) size weighs 7.4 oz (210 g), heavier than most zinc pulls of the same length.

Which size for a 30 in wide drawer?

A pull around one third of the drawer's width looks balanced. On a 30 in (76 cm) drawer that points to the 7-9/16 in (192 mm) or 8-13/16 in (224 mm) size, at 10-1/4 in (260 mm) and 11-3/16 in (284 mm) long.

Can I use it on a bathroom vanity?

Yes. Brass handles a damp bathroom well. Wipe splashes off now and then so water spots don't build up on the brushed surface.

Can I use it on furniture?

Yes. The 2-1/2 in (64 mm) and 3-3/4 in (96 mm) sizes suit dressers, nightstands and sideboards, and the ball feet sit well on both painted and natural wood.