Black Nylon Pull Handle

What this handle is

This is a pull handle made of black nylon. It has a smooth, matte surface that is easy to grip and easy to keep clean. The handle mounts flat against the face of a door or drawer, so it sits close to the surface and does not catch on sleeves or nearby items.

It is sold as a single handle. Two M4 screws are included with each one, and both screws drive in from the front. That means you do not need to reach behind the door to fasten it. You drill two holes at the hole spacing you choose, set the handle in place and tighten the screws.

The black finish suits dark cabinets, painted wood, metal cabinets, shop storage and equipment panels. It is a plain, useful handle rather than a decorative one, and that is the point.

Sizes

Pick the hole spacing that matches the holes you already have, or the one that fits the door you are building. Hole spacing is the distance between the centers of the two mounting holes.

Measure your existing holes center to center before you order. If you are drilling new holes, mark them with a template or a spacer so the handle sits level.

Where it works

This handle suits cabinet doors, drawer fronts, toolboxes, machine panels, shop cabinets and equipment enclosures. The nylon body is non-metallic, so it is a good choice where you want a handle that does not feel cold in the hand.

It is not for doors thicker than 2 in (50 mm). Check your door thickness before you buy. If your door is thicker than that, the included screws will not be the right fit.

Because the handle mounts from the front, it works well on doors you cannot open while installing, and on panels where the back is hard to reach.

Fitting

1. Confirm your hole spacing and door thickness.
2. Mark the two hole centers on the door face. Keep them level.
3. Drill pilot holes sized for the M4 screws and the material of your door.
4. Set the handle over the holes.
5. Drive the two M4 screws in from the front and tighten them evenly. Do not overtighten, since the nylon can compress.

If you are replacing an old handle, use its holes when the spacing matches one of the three options. That saves you from drilling new holes and patching the old ones.

Care

Wipe the handle with a dry cloth. That is all it needs. Avoid soaking it or using harsh cleaners, and it will keep its finish.

What you get

One black nylon pull handle and two M4 screws. Sold as a single handle, so order the number you need for your project.