The Round Brass Cabinet Knob

What it is

This is a round cabinet knob cut from solid brass. The face is smooth and slightly domed, with a brushed finish that hides fingerprints better than a polished surface. There is no backplate and no visible hardware on the front, just the knob itself sitting against the door or drawer face.

Because it is solid brass rather than a plated shell, it has real weight in the hand. Each knob weighs 2.2 oz (62 g). That weight is what you feel when you pull a drawer open, and it is the reason brass knobs tend to stay tight over years of use.

The knob fixes with a single M4 screw that comes in from the back of the door or drawer front. One screw is included with each knob.

Sizes

The knob comes in eight sizes. The first number is the diameter across the face, the second is the depth from the mounting surface to the front of the knob. All measurements are in inches with the metric value in brackets.

A good rule for kitchens: use a smaller size on upper cabinet doors and a larger size on lower drawers, so the pull matches the weight of what it opens. For a dresser or a bathroom vanity, the mid sizes usually sit best.

Color

The knob comes in brushed brass. The finish is warm rather than bright yellow, and it reads as a soft gold in most kitchen lighting. Brushed brass pairs well with white, navy, green and black cabinet fronts, and it sits comfortably next to stainless appliances without competing with them.

If you are matching new knobs to older brass hardware in the same room, keep in mind that brass patinas differently over time. New knobs will look brighter at first and settle in with use.

How to fit it

You need one hole per knob. The included screw passes through the back of the door or drawer front and threads into the knob. A single M4 screw means there is nothing to align and nothing to adjust, which makes this a simple swap on most cabinets.

A few things to check before you order:

• Door or drawer front thickness. The knob is not for doors thicker than 2 in (50 mm).
• Existing hole size. If you are replacing old hardware, the hole should suit an M4 screw.
• Spacing. On drawers wider than about 18 in (46 cm), two knobs read better than one and make the drawer easier to pull evenly.

To fit, mark your position, drill the hole, push the screw through from the back and turn the knob on by hand. Tighten until the knob sits flush against the face. Do not overtighten, since brass threads can strip if you force them.

Care

Wipe the knob with a dry cloth. That is all it needs for everyday dust and fingerprints. Avoid wet cloths, abrasive pads and household cleaners, which can dull the brushed finish or leave water spots. If the brass darkens over time and you prefer the original look, a dry soft cloth is still the safest first step.

Where it works

Kitchen cabinet doors and drawers, bathroom vanities, dressers, nightstands, built-in cupboards and storage benches. The round shape has no sharp edges, so it is comfortable to grab on a drawer you open many times a day. Because it is sold as a single, you can order one to test the size and finish before committing to a full kitchen.