The Round Brass Cabinet Knob
Solid brass knob with a single M4 screw, 1 in (25 mm) across, sold as a single.
from $20.95single
The Knurled Brass Cabinet Knob and Pull
$28.95
Solid brass cabinet hardware with a crisp, straight knurl and a soft matte nickel brushed silver finish. Sold individually with a rear mounting screw for kitchens, baths and dressers.
Expected delivery Fri, Nov 6 to Sat, Nov 14
- Free shipping over $49
- 30-day returns
Shipping and returns
Free shipping over $49. Arrives in 8-16 days. Shipping times and costs per country
Not what you were looking for? Return it within 30 days of delivery. How returns work
Specifications
- Material
- Solid brass
- Fixing
- Single screw from the back
- Screws
- 1 in (25 mm) screws included
- Sold
- Single
- Care
- Wipe with a dry cloth
- Not for
- Doors thicker than 1 in (25 mm)
- Size
- 0.79 x 1.26 in (20 x 32 mm)
- Color
- Matte nickel brushed silver
- Weight
- 2.65 oz (75 g)
What it is and what it is made of
This is a knurled cabinet knob and pull for kitchens, bathrooms, dressers and wardrobes. The body is solid brass, so it has real weight in the hand and a crisp, straight knurl around the grip. The finish is matte nickel brushed silver: soft, low shine, and easy to live with on light and dark cabinet fronts. Each piece fixes with a single screw from the back, so the front stays clean with no visible hardware.
Sizes
Seven sizes are available. The knob is the shortest option and suits drawers and small doors. The T-bar is a wider grip for a single hole. The pulls run from 5 to 10 in and suit larger drawers, wardrobes and appliance panels. All measurements are listed as width by height.
| Option | Size |
|---|---|
| Knob | 0.79 x 1.26 in (20 x 32 mm) |
| T-bar | 2 x 1.5 in (51 x 38 mm) |
| Pull | 5 x 1.5 in (127 x 38 mm) |
| Pull | 6.5 x 1.5 in (165 x 38 mm) |
| Pull | 7.5 x 1.5 in (191 x 38 mm) |
| Pull | 9 x 1.5 in (229 x 38 mm) |
| Pull | 10 x 1.5 in (254 x 38 mm) |
Finish and style
The matte nickel brushed silver finish sits between polished chrome and raw steel. It reads warm rather than cold, and it hides fingerprints better than a high gloss surface. The knurled pattern gives the grip a machined look that pairs well with flat front cabinets, shaker doors, and furniture with straight lines. Because the finish is brushed, light moves across the surface in a soft way rather than a sharp reflection. This is a good match for kitchens with stainless appliances, and it also works on painted or wood furniture where a bright polished knob would feel too formal.
How to fit it
Each knob or pull fixes with a single screw from the back of the door or drawer front. One 1 in (25 mm) screw is included with each piece. Drill a hole at your chosen spot, pass the screw through from the back, and thread it into the knob or pull. Tighten by hand until the piece sits flush and does not spin. The screw length suits doors and drawer fronts up to 1 in (25 mm) thick. This hardware is not for doors thicker than 1 in (25 mm). If your door is thicker, you will need a longer screw from a local hardware store.
Care
Wipe with a dry cloth. That is all this finish needs. A dry cloth lifts dust and light fingerprints without leaving streaks. Avoid wet cloths, abrasive pads and household cleaners, which can dull the brushed surface over time. If the knurl collects dust, a soft dry brush works well in the grooves.
Where it works
Use the knob on upper cabinets, small drawers and vanity doors. Use the T-bar on lower cabinets and drawers that need a wider grip. Use the longer pulls on wide drawers, wardrobe doors, and built-in storage. Because all sizes share the same finish and knurl, you can mix shapes in one room and still have a single, consistent look. A common approach is a knob on doors and a pull on drawers, or a knob on upper cabinets and a pull on lower ones.
Questions
What is this knob made of?
It is made of solid brass with a matte nickel brushed silver finish. The brass gives it real weight, and the finish keeps the shine soft.
How does it attach to the cabinet?
It fixes with a single screw from the back of the door or drawer front. One 1 in (25 mm) screw is included with each knob or pull.
Will it fit my cabinet doors?
It fits doors and drawer fronts up to 1 in (25 mm) thick. It is not for doors thicker than 1 in (25 mm).
How do I clean it?
Wipe with a dry cloth. Avoid wet cloths and abrasive cleaners, which can dull the brushed finish.
You might also like
The Antique Bronze Round Brass Cabinet Knob
Solid brass cabinet knob in antique bronze, sold as a single knob with two M4 screws.
from $24.95single
Round Zinc Cabinet Knob
Round zinc alloy cabinet knobs in gold or black, sold in packs of 25 with two screw lengths.
$32.95pack of 25
Heritage Antique Bronze Cabinet Knob
Vintage zinc alloy knob with a single-hole back screw, sold as a single knob for cabinets and dressers.
from $20.95single
The European Round Cabinet Knob
A round metal knob with a European profile, sized for kitchen cabinets, dressers and closet doors.
$28.95pack of 5 or Pack of 10
Nurlin Solid Brass Cabinet Knob
Solid brass cabinet knob with a single M4 screw, for kitchen cabinets, dressers and wardrobes
$28.95single
