Adhesive Towel Bar

What it is

The Adhesive Towel Bar is a stainless steel bar that mounts to the wall with self-adhesive backing. There are no screws, no anchors and no drill. You peel the backing, press the bar in place and let the adhesive set.

The bar measures 15.35 x 2.36 in (390 x 60 mm). That length suits a hand towel, a bath towel folded over, or a kitchen towel near the sink. Stainless steel resists the damp air of a bathroom and the splashes of a kitchen.

Sizes and options

One size, four choices. Pick the color and the bar count that fit your room.

A single bar keeps a wall clean and simple. A double bar gives you two hanging lines in the same footprint, which helps when several people share a bathroom. Black reads warm against tile and painted walls. Silver blends with chrome faucets and stainless appliances.

Where it works

Bathroom hardware is the main job. Hang it beside the sink for a hand towel, on the wall opposite the shower for a bath towel, or near the tub. In a kitchen, it holds a dish towel within reach of the counter. A double bar works well on a narrow wall where you want two towels but only have room for one fixture.

The adhesive needs a surface it can grip. Smooth tile, glass, painted drywall, laminate and metal are good candidates. Clean the spot first, let it dry fully, then press the bar on and give the adhesive time to cure before you hang anything.

How to fit it

1. Choose a flat, smooth spot at a comfortable height.
2. Wipe the wall with a dry cloth to remove dust and film.
3. Peel the backing from the adhesive strip.
4. Press the bar firmly against the wall and hold it for a slow count.
5. Wait before loading the bar, then hang your towel.

No drill means no holes to patch later, which helps in rentals and in rooms where you would rather not cut into tile. If you need to remove the bar, work it away from the wall slowly and gently.

Care and limits

Wipe the bar with a dry cloth. A dry cloth is enough for everyday dust and water spots, and it keeps the stainless steel looking even.

This bar is not for rough, dusty or wet wall surfaces. Brick, unfinished concrete, textured plaster and damp areas will not give the adhesive a solid hold. If your wall is one of those, this is not the right fixture for that spot. Find a smooth, dry surface instead, or use a different mounting method.

Good to know

• Material: stainless steel.
• Size: 15.35 x 2.36 in (390 x 60 mm).
• Fixing: self-adhesive backing, no drilling.
• Colors: black or silver.
• Styles: single bar or double bar.
• Care: wipe with a dry cloth.
• Not for rough, dusty or wet wall surfaces.