The Simple Adhesive Wall Hook

What it is

The Simple Adhesive Wall Hook is a small stainless steel hook with an adhesive backing. There is no drilling and no hardware to line up. You peel the backing, press the hook to a smooth surface, and it is ready to hold light items.

The stainless steel body wipes clean with a dry cloth and stands up to everyday use in a bathroom, entryway or bedroom. The finish comes in Silver or Black, so you can match your cabinet pulls, door handles or switch plates.

Size and pack

Each hook is the same size, and every pack holds 4.

One size keeps things simple. The 1.77 x 1.77 in (45 x 45 mm) face is small enough for a narrow strip of wall beside a door or a short run of tile above a sink.

Colors

Pick the finish that fits the room:

• Silver, pack of 4
• Black, pack of 4

Silver reads bright and clean against white tile, painted trim and light walls. Black sits back against dark wood, matte cabinets and darker paint. Order one finish for the whole pack, or pick up a pack in each color if you want both on hand.

Where to use it

These hooks suit light, everyday items. Think coats, keys, towels, robes, aprons, lanyards and small bags. A row of 4 along an entryway wall makes a simple key holder for the wall, with one hook per person. In a bathroom, a pair near the shower holds towels within reach. In a bedroom, one behind the door takes a robe.

The adhesive backing works best on smooth, flat, clean surfaces: painted drywall, tile, glass, metal, laminate and sealed wood. Rough brick, textured plaster and fresh paint are not good candidates. The hook holds only what the adhesive can support, so keep loads light and skip heavy bags, tools and anything that pulls down hard.

How to fit it

1. Clean the spot with a dry cloth. It should be free of dust, oil and moisture.
2. Let the surface dry fully if you wiped it with anything damp.
3. Peel the backing from the adhesive.
4. Press the hook firmly against the wall and hold it for several seconds.
5. Wait before hanging anything, so the adhesive can settle.

Place each hook where you want it the first time. The adhesive is meant for a single spot, and moving it can weaken the hold. If you need to remove a hook, work it slowly away from the wall rather than pulling straight out.

Care and limits

Wipe the stainless steel with a dry cloth. A soft cloth keeps the finish even and removes fingerprints and dust. Avoid abrasive pads and harsh cleaners.

These hooks are not for holding items heavier than the adhesive can support. Check the load now and then, and take the item down if the hook starts to shift. For heavy coats, loaded bags or anything that hangs low and pulls, use a screw-fixed hook instead.

A pack of 4 covers a small entryway, a bathroom wall or a closet door without any tools. Keep the spare hooks on hand for the next spot that needs one.