Outdoor Socket Waterproof Box
A plastic cover that shields an outdoor socket from rain, sold singly in four colors.
$24.95single
Glass Cable Exit Wall Plate
$33.95
Tempered glass faceplate with a pre-drilled center hole that routes low-voltage cables cleanly out of the wall to a screen or speaker. Sits flush for a smooth, finished look.
Expected delivery Fri, Nov 6 to Fri, Nov 13
- Free shipping over $49
- 30-day returns
Shipping and returns
Free shipping over $49. Arrives in 8-15 days. Shipping times and costs per country
Not what you were looking for? Return it within 30 days of delivery. How returns work
Specifications
- Material
- Tempered glass
- Size
- 3-3/8 x 3-3/8 x 1-3/8 in (86 x 86 x 36 mm)
- Sold
- Single
- Care
- Wipe with a dry cloth
- Not for
- Cables thicker than the center hole
What it is
The Glass Cable Exit Wall Plate is a replacement faceplate with a pre-drilled center hole. Cables pass through that hole instead of hanging over the edge of a standard cover. The plate is made of tempered glass, so the surface is smooth and easy to keep clean.
Use it where a cable needs to leave the wall and run to a screen, speaker or other low-voltage device. The plate sits flush against the wall like a standard cover and gives the run a finished look.
Size and fit
| Measurement | Value |
|---|---|
| Width | 3-3/8 in (86 mm) |
| Height | 3-3/8 in (86 mm) |
| Depth | 1-3/8 in (36 mm) |
Check the opening in your wall before you order. The plate is sold as a single unit, so measure first if you plan to cover more than one spot.
The center hole is sized for cables that fit through it. Cables thicker than the center hole will not pass through. If your cable has a large connector on the end, confirm the connector fits before you install the plate.
Colors
Pick the finish that matches the room:
- White glass
- Black glass
- White
- Gray glass
- Gold glass
- Black
- Gold
- Gray
The glass options have a smooth, reflective surface. The solid color options give you a flatter look. All options use the same size and the same center hole.
How to install
- Turn off power at the breaker if the wall box holds any wiring.
- Remove the old faceplate from the wall box.
- Feed the cable through the center hole of the new plate.
- Line up the plate with the box and press it into place.
- Secure it with the mounting screws for the box.
If you are only routing a low-voltage cable, no wiring connection is needed at the plate. The plate is a cover, not a connector. It does not join cables or carry current.
Care
Wipe the plate with a dry cloth. Keep liquids away from the center hole and the edges of the glass. A dry cloth is enough for dust and fingerprints.
Where it works
This plate suits media walls, desks, shelves and other spots where a cable leaves the wall. It also works as a blank cover with a pass-through when a cable needs a tidy exit point. Match the color to your other wall plates for a consistent look across the room.
Questions
What size is the cable exit wall plate?
It measures 3-3/8 x 3-3/8 x 1-3/8 in (86 x 86 x 36 mm). Check your wall opening against those numbers before ordering.
What is the plate made of?
The plate is made of tempered glass. Wipe it with a dry cloth to keep the surface clean.
Can I use a thick cable with this plate?
It is not for cables thicker than the center hole. Measure your cable and its connector before you install the plate.
How many plates come in an order?
Each order is a single plate. If you need more than one, order the quantity you need.
You might also like
The Walnut and Brass Switch Plate
Black walnut wood wall plate with brass screws, sold as a single piece for standard 86 mm boxes.
from $36.95single
The Arcade Light Switch Cover
A retro arcade style wall plate for standard rocker switches, sold as a single cover.
$24.95single
Walnut Wood Toggle Switch Plate
Walnut wood wall plate with brass toggles, sold as a single cover in 1 to 4 toggle configurations
from $36.95single
